Alistagen Corporation - Ten Park Avenue - New York, New York 10016 - www.caliwel.com


MATERIAL SAFETY DATA SHEET

____________________________________________________________________________

Alistagen Corporation                           Medical & Transport Emergency Contact:
Ten Park Avenue                                   (866) 280-0001
New York, NY  10016                                                                                                         

MSDS Date: 02 27 2002                         Supersedes:  All Previous

____________________________________________________________________________

Product Identification
Trade Name:  Caliwel with BNA – Antimicrobial* Covering      
Chemical Family:  SBR Emulsion       DOT Classification: 

*Caliwel contains an antimicrobial active ingredient – Calcium hydroxide – that protects both the liquid coating and the dried coating’s surface.

____________________________________________________________________________

Physical Data  
Boiling Range (F):  220° F Vapor Density (Air=1):  Heavier than Air
Freeze Point (F):   32° F Volume Solids:  35%
Solubility in Water:  Miscible Weight/Gallon:  11.25 lbs
Evaporation Rate (Butyl Acetate = 1):  Slower than Ether pH @ 77° F:  12.5 
Appearance & Odor:  White liquid; mild glycol ether odor  Specific Gravity:  1.351

____________________________________________________________________________

Fire & Explosion Hazard Data                                               Fire Extinguishing Media:

Flash Point (F): NA                                                                   Non-Flammable

LEL:  NA
UEL:  NA
Flammability Classification:  Non-Flammable
DOT:  No information Special Fire Fighting Procedures:  NA
Unusual Fire and Explosion Hazards:  NA

_________________________________________________________________________

Reactivity Data

Hazardous Decomposition Products:  Thermal decomposition yields oxides of carbon

Hazardous Polymerization:  Will not occur under normal conditions

Stability:  This product is stable under normal storage conditions

Incompatibility:  No information

Conditions or Materials to Avoid:  No information

__________________________________________________________________________________________________________________

Health Hazard Data

Effects of Over Exposure:

   Inhalation:          No information

   Ingestion:           May be harmful if swallowed

   Skin Contact:     May cause skin irritation

   Eye contact:       May cause eye damage

Chronic Hazards:  No information

Primary Routes of Entry:  Ingestion

Toxicity:                 No information

EMERGENCY FIRST AID PROCEDURES

Eye contact:          Flush with large quantities of clean water

Skin contact:         Thoroughly wash exposed area with soap and water
Inhalation:             No information

Ingestion:              Call physician.  Dilute with water.  Do not induce vomiting.

__________________________________________________________________________________________________________________

Spill or Leak Procedures

Spills:                     Dike and contain spill with an inert material.  Transfer liquid to containers for recovery or disposal.

Waste Disposal:   Dispose of in accordance with local, state and federal regulations. 

__________________________________________________________________________________________________________________

Special Protection Information
Respiratory Protection:    Any person who may be exposed to this product in the form of an aerosol or mist from spray operations shall, at a minimum, wear a NIOSH-approved or equivalent respirator, in accordance with 30 CFR 11.130 Sub-part K. Use of this respirator shall be in accordance with OSHA and MSHA regulations at 29 CFR 1910.134 and 30 CFR 11, respectively.  If a full-face respirator is selected and worn, the chemical safety goggles requirement is waived during spray operations.
Ventilation:     General dilution or local exhaust ventilation to remove solid airborne particles of over spray during spray application and to remove decomposition products during welding or frame cutting on surfaces coated with this product. 
Protective Clothing:   To prevent prolonged skin contact, wear impermeable gloves, clothing or boots.
Eye Protection:     Wear chemical safety goggles if spraying and available eye bath.

Hygienic Practices:              

Remove and wash contaminated clothing before re-use. Wash hands with soap and water.  Emergency eye wash fountain and safety shower should be available in the vicinity of any potential over-exposure. 
Special Precautions:            Store in tightly closed, properly ventilated containers in a cool, dry place.  Do not puncture containers or expose product to moisture.  

__________________________________________________________________________________________________________________

Disclaimer

The information in this MSDS was obtained from sources we believe are reliable.  However, the information is provided without any representation or warranty, expressed or implied, regarding its accuracy or completeness.

The conditions of handling, storage, use and disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of this product.